Safety Alert issued July 12, 2012Exposure to high temperature environments, which firefighters can encounter during fires they are attempting to extinguish, can result in the thermal degradation or melting of a Self- Contained Breathing Apparatus (SCBA) facepiece lens, resulting in elimination of the protection meant for the user’s respiratory system and exposing the user to products of combustion and super heated air.
Self-Contained Breathing Apparatus (SCBA) is a critical component in the personal protective equipment (PPE) used by today’s fire service. This equipment is essential for allowing fire fighters to operate in hostile fire ground environments. However, in recent decades there have been significant shifts with the environments encountered by structural fire fighters and how they operate in those environments.
- Structure fires involving modern building construction and furnishings produce significantly higher heat release rates than legacy buildings and their furnishings of earlier years, exposing firefighters to more rapid heat development and intense thermal conditions.
- PPE used by firefighters has evolved to provide enhanced overall thermal protection, allowing firefighters to remain in adverse conditions for longer time periods.
- Enhanced PPE for today’s firefighters has made them less able to detect changing thermal conditions.
During the investigation of firefighter fatalities that occurred from 2002 to 2011, the National Institute for Occupational Safety and Health (NIOSH) found evidence of thermal degradation of facepiece lenses that may have been a contributing factor in three fatalities.1
In the fatality cases, the firefighters were likely still “on air” at the time they were overrun by extreme thermal conditions; all had their SCBA facepiece still in place; all had SCBA facepieces that displayed extensive damage consistent with thermal conditions that likely exceeded the capabilities of the SCBA facepiece lens, resulting in the loss of respiratory protection from an Immediately Dangerous to Life and Health (IDLH) environment. The firefighters in these incidents suffered thermal injuries to their respiratory system and sustained inhalation injuries from products of combustion.
NIOSH also reported on the investigation of three SCBA from a state training academy2 where the SCBA facepiece lens showed evidence of thermal degradation after being used in live fire training. Additionally, in four other NIOSH Line of Duty Death Investigations3, the evidence, while not conclusive was suggestive of possible SCBA degradation or failure.
Among the voluntary consensus standards developed by the National Fire Protection Association (NFPA) are standards for firefighter personal protective clothing and equipment. These include NFPA 1981, Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services, which is principally developed by NFPA’s Technical Committee on Respiratory Protection Equipment (the Technical Committee). The concerns with facepiece lenses identified in the NIOSH investigations were brought to the attention of the NFPA Technical Committee by the National Institute of Standards and Technology (NIST) and the NIOSH Division of Safety Research, Fire Fighter Fatality Investigation and Prevention Program.
In addition, in 2010 NIST, NIOSH, the Fire Protection Research Foundation (FPRF) and the NFPA jointly hosted a research planning workshop on evaluating and addressing the concerns regarding the thermal impact of SCBA facepiece lenses.4
Subsequently, the Department of Homeland Security (DHS) and the United States Fire Administration (USFA) funded and participated with NIST in research5 that validated the adverse consequences to firefighters when lens degradation occurs in extreme thermal conditions and developed and provided new testing and performance methodologies to the NFPA Technical Committee on Respiratory Protection Equipment.6 Based on the information learned from the NIOSH investigations and NIST research, this Technical Committee is in the process of incorporating new test methods and performance criteria for facepiece lenses into the proposed 2013 edition of NFPA 1981, which is slated for completion and issuance as early as the Fall of 2012. Information on the continuing development of this new edition is available at http://www.nfpa.org/1981next.